Oracle Campus College life, figured out.

Final grade calculator

Enter your current grade, how much the final is worth and the course grade you want: the calculator gives the score you need on the exam.

The score you need on the final is: (target grade − current grade × (1 − final weight)) ÷ final weight. With an 86% in the class, a final worth 30% and a target of 88%, you need about 92.7% on the exam.

Enter your three numbers below. If the answer is above 100%, the target is out of reach with the final alone. If it is below 0%, you already have it.

You need on the final

—

To finish withYou need on the final

How the final grade calculator works

Your course grade is a weighted average. If the final is worth 30% of the grade, everything else you have done is worth the other 70%. So:

Course grade = current grade × (1 − final weight) + final exam score × final weight

The calculator solves this for the final exam score:

Score needed = (target grade − current grade × (1 − final weight)) ÷ final weight

Write the weight as a decimal: 30% is 0.30, 25% is 0.25.

Worked example

You have an 86% in the course. The syllabus says the final exam is worth 30%. You want to finish with an 88%.

  1. The part of your grade already earned: 86 × (1 − 0.30) = 86 × 0.70 = 60.2 points.
  2. The points still missing: 88 − 60.2 = 27.8.
  3. The score needed: 27.8 ÷ 0.30 = 92.67%.

Check it: 60.2 + 92.67 × 0.30 = 60.2 + 27.8 = 88.0. It works.

Here is what the same student needs for other targets:

Target course gradeCalculationScore needed on the final
90%(90 − 60.2) ÷ 0.30 = 29.8 ÷ 0.3099.33%
88%(88 − 60.2) ÷ 0.30 = 27.8 ÷ 0.3092.67%
80%(80 − 60.2) ÷ 0.30 = 19.8 ÷ 0.3066.00%
70%(70 − 60.2) ÷ 0.30 = 9.8 ÷ 0.3032.67%

A 99.33% is possible but leaves no room for a single mistake. That is useful to know before the exam, not after.

If your class uses total points

Some courses grade on points instead of percentages. The method is the same once you turn points into a weight: the final's weight is its points divided by the course's total points.

Example: a course is worth 1,000 points and the final is worth 200 of them, so its weight is 200 ÷ 1,000 = 20%. You have earned 680 of the 800 points graded so far, which is 680 ÷ 800 = 85%. To finish with 80% you need 800 points in total, so 800 − 680 = 120 points on the final, which is 120 ÷ 200 = 60%. The formula gives the same answer: (80 − 85 × 0.80) ÷ 0.20 = (80 − 68) ÷ 0.20 = 12 ÷ 0.20 = 60%.

For a 90% you would need 900 − 680 = 220 points on a 200-point exam. That is over 100%, so the target is out of reach unless there is extra credit.

Common mistakes

  • Using a current grade that includes ungraded work. Some online gradebooks show a grade based only on what has been graded so far, and others count missing work as zero. Your current grade should be your average on everything before the final, weighted the way the syllabus says.
  • Forgetting other work still to come. If a project or a last quiz is not graded yet, the final is not the only thing left. Treat that work as part of the remaining weight, or the result will be off.
  • Guessing the weight. A final worth 20% and one worth 40% give very different answers. Take the number from the syllabus.
  • Assuming rounding. Whether an 89.5% becomes an A- is your instructor's call. Aim for the cutoff itself.

What depends on your course

Some instructors drop the lowest quiz, let the final replace a midterm score, or curve the class. Those rules change the math, and they are written in the syllabus (or announced by the instructor). The calculator assumes a plain weighted average. When in doubt, ask your instructor or TA what your grade is before the final and how much the final counts.

From course grades to GPA

Once you know the letter grade you are likely to get, you can see what it does to your GPA:

Common questions

How do I calculate what I need on my final?

Subtract your current grade times (1 minus the final's weight) from your target grade, then divide by the final's weight. With an 86%, a final worth 30% and a target of 88%: (88 − 86 × 0.70) ÷ 0.30 = 27.8 ÷ 0.30 = 92.67%.

What if the calculator says I need more than 100%?

Then the final exam alone cannot get you to that target. Look at a lower target, or ask your instructor whether extra credit, a dropped score or a final that replaces a lower exam could apply in your course.

Can I fail the final and still pass the class?

Sometimes. Enter the passing grade as your target: if the score needed is low, a weak final may still leave you passing. Some courses require a minimum score on the final itself, so check the syllabus.

Where do I find how much my final is worth?

In your course syllabus, usually in the grading or evaluation section. If it is not there, ask your instructor or TA.

What grade do I need on the final to keep an A?

Enter your school's A cutoff as the target. On a common scale an A starts at 93% and an A- at 90%, but your instructor sets the cutoffs for your course.

Sources